Beaters of proper designed shape and size to allow the appropriate garment movement during treatment and to guarantee the right mechanical action on the garments.
Large diameter to allow a good mechanical action during the treatment.
Great bath exchange through the garments thanks to a thick punching.
The transmission is made by means of n°2 alternate current motors controlled by inverter.
N°2 centrifuge speed (high speed and low speed). Transmission by means of trapezoidal belts.
N°2 water inlets with pneumatic valves and litres - counter.
Automatic thermal cycles control
Pneumatic bath liquor drainage.

Electrical board containing all power and auxiliary components.
Control board with video terminal capable to store up to 90 programs of 50 steps each and machine control.
Switch and buttons to control the machine.

The rotary machines model LCO are machines designed for all kind of treatments on ready-made garments such as: enzyme stone wash, rinsing, softeners, milling and dyeing.
Machines structure made in black iron sheets of large dimension.
The parts in contact with the liquor bath are made in stainless steel Aisi 304.
Washing version: the shell is made in stainless steel 304. The frontal and rear frame are covered by stainless steel Aisi 316 sheets.
Dyeing version: the shell is made in stainless steel 316. The frontal and rear frame are made in stainless steel Aisi 316.
Empty drum not divided into compartments.
Machine composed by a double frame. One fixed and one movable supported by shock absorbers and several springs.
Tempered glass windows for visual control of the bath liquor placed in the front side.
Self - balancing system to balance the machine during centrifuge phase.
Machine block in case of any bad working of electrical circuit.

Forward tilting system to make easier garments unloading by means of pistons and hydraulic unit.
Washing version:
N°1 products tank with introduction by means of a pump.

N°1 direct steam inlet with pneumatic valve.
Dyeing version:
the machine can be equipped with a colour kitchen composed by n°1 tank for dyestuff preparation with mixer and in direct heating
N°1 tank for chemicals.
Indirect heating and cooling by means of a coil installed inside the machine.
Upon request can be installed an external heating exchanger, filter and recycling pump.