The machine is called Passing Through because it is installed on the wall separating one room from the other. An aseptic room where the linen to be washed is placed and a septic room where the linen is discharged after washing. Machine structure made in black iron frames. All parts in direct contact with the bath liquor are made in stainless steel Aisi 304. Drum internal side made in stainless steel Aisi 316 with passing through shaft supported in both sides of machine by large size bearings. Drum divided into three of the same size and shape. External doors equipped with electrical and pneumatic safety devices. Sampling porthole. Automatic alignment between drum doors and external doors (loading and unloading door). Electric and pneumatic safety devices are installed in the external doors. Windows for visual control of the bath. One alternate current motor controlled by inverter. Transmission by trapezoidal belts.
			Variable washing speed. Two hydro - extracting speed. One steam inlet with pneumatic valve. Direct heating. Cooling by introduction of cold water and drain valve opening.N° 2 water inlets with pneumatic valves. Pneumatic drain (discharge). Flow meter to control the introduction of water into the machine. Suspension system by means of hydraulic shock-absorbers, reaction springs and ballast (it works during hydro-extracting phase in case of unbalanced loading).		Valves with electric or pneumatic control. N°1 products dispenser (2 powders - 2 liquid chemicals). N°8 outlets available in case of product automatic dispenser Electric board with all power and auxiliaries components. Control board equipped with microprocessor and screen with capacity to store up to 90 programs of 50 steps each for the automatic control of the machine.